Replacing The Recovery Filter - Hitachi IJ RX2 Technical Manual

6.8 Replacing the recovery filter

● Do not perform this operation while ink is being ejected. Perform it after setting the IJ printer to the "Stop"
state.
Pull out the makeup reservoir.
1
Rotate the lock nut of the recovery filter and pull it forward and out.
2
Remove the O ring and filter with tweezers and mount new ones.
3
Return it to its original state, and check to see that there is no leak of the ink in
4
operation.
* Tighten the nut securely by hand.
Pull out
Lock nut
O ring
Filter
Recovery filter
Makeup reservoir
CAUTION
If ink is accidentally spilt, wipe it up
promptly with wiping paper or
something similar.
In addition, do not close the
maintenance cover until you are
sure that the wiped portion has
completely dried.
Filter
O ring
●Replacing the recovery filter 6-22