Zanussi ZRA226CWO User Manual page 20

4. Unscrew and remove the bottom hinge pin, and
replace in another hole.
5. Interchange two brackets and fit them. Replace both
adjustable feet.
6. Unscrew and remove the top hinge pin, turn the top
hinge over and replace the pin.
7. Transfer the door to the proper position. Ensure the
door is level; insert the bottom hinge pin into the
lower hole of the door and the top hinge pin into
upper hole of the door. Then tighten the top hinge
with three flange screws.
20
8. Move the front small plate from left to right.
9. Replace the top cover.
Before replacing the door, please alter the position of
the handle and hinge hole cover.
1. Use a flat bladed screwdriver to remove the 2 screw
covers at the side of the handle. Then unscrew the
handle and fit it to the other side of the door.
2. Move the hinge hole cover to the other side.