Overview - Bosch MUM 54920GB Operating Instruction

Overview

The operating instructions describe several
models, see also overview of models (Fig.
 ). The appliance requires no maintenance.
Please fold out the illustrated pages. Fig. 
Base unit
1 Release button
2 Swivel arm
"Easy Armlift" function to support the
upward movement of the arm (see "Work
positions").
3 Rotary switch
When the appliance has been switched
off (position 0/off), the appliance runs
automatically to the optimum position for
changing the tools.
MUM52..:
0/off = Stop
M = Instantaneous switching at maximum
speed, hold switch for required blending
duration.
Settings 1–4, Operating speed:
1 = low speed – slow,
4 = high speed – fast.
MUM54../MUM55../MUM56..:
0/off = Stop
M = Instantaneous switching at maximum
speed, hold switch for required blending
duration.
Settings 1–7, Operating speed:
1 = low speed – slow,
7 = high speed – fast.
4 On/Off display (MUM54../55../56..)
Is lit while the appliance is operating
(rotary switch on M or 1–7).
Flashes if the appliance has been
operated incorrectly, the electronic fuse
has tripped or the appliance is defective –
see section "Troubleshooting".
5 Drive cover
To remove the drive cover, press on the
rear area and remove cover.
6 Drive for
– Continuous-feed shredder and
– Citrus press (optional accessory *).
When not in use, attach the drive cover.
7 Drive for tools (stirrer, whisk, kneading
hook) and mincer (optional accessory *)
8 Blender drive cover
Robert Bosch Hausgeräte GmbH
9 Drive for blender (optional accessory *)
When not in use, attach the blender drive
cover.
10 Cord store
MUM52../MUM54..:
Stow the cord in the cord store
MUM55../MUM56..:
Automatic cord winder
Bowl with accessories
11 Stainless steel stirring bowl
12 Lid
Tools
13 Stirrer
14 Whisk
15 Kneading hook with dough deflector
16 Accessories bag
For storage of the tools and cutting discs.
Continuous-feed shredder
17 Pusher
18 Cover with filling shaft
19 Cutting discs
19a Reversible slicing disc – thick/thin
19b Reversible shredding disc – coarse/
fine
19c Grating disc – medium-fine
20 Disc holder
21 Housing with outlet opening
*
Blender
22 Blender jug
23 Lid
24 Funnel
* If an accessory is not included in the
product package, it can be purchased via
the trade or customer service.
Operating positions
Attention!
Before operating the appliance, attach the
tool/accessory to the correct drive and in the
correct position and place in the operating
position according to this table.
The swivel arm must be engaged in every
operating position.
Note:
The swivel arm features an "Easy Armlift"
function which supports the upwards
movement of the swivel arm.
en

Fig.
31