Replace Spare Parts - Electrolux WEK 7 Service Manual

6. Replacing Spare Parts
6.1 Door elements
6.1.1 Levelling out the door
1. An elongated hole is situated in the KS frame (top
and bottom) which can be used to adjust the door
height
2. An elongated hole is situated in the door (top and
bottom) which can be used to adjust the door in a
longitudinal direction
Ensure that the gap between the niche and the door is
the same all around.
6.1.2 Replacing the door
1. Remove the bottom and top covers
2. Remove the internal screw from the top and the
bottom
3. Loosen the external screw (do not remove)
4. Push the hinge out and then remove the door.
5. Mount the new door in the reverse order
DGS-TDS-N 05.2006 © Electrolux
2.
3.
4.
9 168 650