Clas Ohlson 18-5039 Instruction Manual

MATRIX ALARM CLOCK
Article number: 18-5039/31-4470
Please read the entire instruction manual before
using and save it for future use. We apologise
for any text or photo errors and any changes of
technical data. If you have any questions concer-
ning technical problems please contact our Custo-
mer Service Department.
(1)
(2)
(3)
(4)
(5)
T. SET NORMAL
AL. OFF AL. ON
AL. SET
(6)
RESET
DOWN UP MODE
(7)
-
(8)
PAT. NO.: 200630056218.5
1. PM indicator
2. Alarm indicator
3. Snooze
4. Function switch (Normal – Al Set – T Set)
5. Alarm control (Al On – Al Off)
6. Down
7. Up
8. Mode
9. Reset
10. DC-connection (+ in the centre)
11. Battery CR2032 (included)
11. Battery compartment
13. Battery lid
GREAT BRITAIN For consumer contact, please visit www.clasohlson.co.uk and click on customer service. Internet: www.clasohlson.co.uk
1. Functions
• Time
• Saved calendar (Year, Month, Date)
• Snooze alarm
2. Setting
First connect the enclosed power adapter (6V,
400mA, + in the centre) to an outlet and the outlet
to the DC connection (12). The display shows
"12:00".
Remove the large cover on the battery compart-
ment and the battery lid. Remove the insulating
plastic strip from the battery. Put the battery lid
and the large cover back on.
Setting the time
a) Set the function switch (3) to T SET (time
setting), the display blinks.
(9)
b) Set the correct time using the buttons UP (8)
(10)
+
and DOWN (9), confirm by pressing MODE (7)
(11)
once.
(12)
c) Continue in the same way with the minutes
and seconds.
d) Set the correct year using the buttons UP (8)
(13)
and DOWN (9), confirm by pressing MODE (7)
once.
e) Continue in the same way with the month and
day.
f) Set the function switch (3) to NORMAL, when
the settings are complete.
Set the alarm and snooze time
1. Set the function switch (3) to AL SET (alarm
setting), the display blinks.
2. Set the correct time using the buttons UP (8)
and DOWN (9), confirm by pressing MODE (7)
once.
ENGLISH
3. Continue in the same way with the minutes.
4. Press MODE (7) again, the current "Snooze
time" blinks in the display, change the snooze
time(1 to 60 minutes) using the buttons UP
(8) and DOWN (9). The factory setting for the
snooze time is 5 minutes. This time stays until
you have changed the setting yourself.
5. Set the function switch (3) to NORMAL, when
the setting is finished.
3. Activating and turning off the
alarm
Activate the alarm: Set the alarm switch (5)
to AL ON to active the alarm. AL is shown in the
display, when the alarm is activated. The alarm
sounds for one minute at the set time.
Turn off the alarm: Set the alarm switch (5)
to AL OFF to turn off the alarm.
Snooze-function: Press SNOOZE (6) to defer the
wake-up signal for 5 minutes (or if you have set
another time, see above), when the alarm's buz-
zer sounds. The snooze function can be used up
to 4 times.
Press any button other than SNOOZE to turn off
the alarm until the next morning.
4. 12/24 hour display
Press DOWN (9) (in normal time display)
to change between 12/24 hour display.
5. Showing the set alarm time,
month, and date.
Press SNOOZE (6) one time to show
•
the set alarm time.
Press SNOOZE (6) once again within
•
3 seconds to show the month and date.
• The alarm clock automatically returns
to normal display of the current time.
6. Reset
If the display locks itself, the alarm clock must be
reset to the factory setting. Press RESET (4) with
a long, narrow object to reset.
7. Back-up Battery
The alarm clock has a battery (CR2032) as a
back-up during power failures. Normally the
battery will last for 5-6 years (depending on the
number of power failures, etc.).
8. Cleaning
Wipe the clock according to need with a lightly
moist cloth. Never use solvents or strong cleaning
agents.
9. Disposal
Sort your garbage and recycle the
clock instead of throwing it away.
All electronic products and packing
materials are to be sorted and handled
according to local authorities.
Warning
Not for use by children under the age of
3 years. Contains batteries, which are
dangerous if swallowed.