Table of Contents
Advertisement
Quick Links
STORM
INSTRUCTIONS FOR
80W 230V
Airless Spray Gun
Stock No.83657
Part No.SG80SF
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND
EFFECTIVE USE OF THIS PRODUCT.
GENERAL INFORMATION
These instructions accompanying the product are the original instructions. This document is part of the product, keep it
for the life of the product passing it on to any subsequent holder of the product. Read all these instructions before
assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed, and
contains all the necessary information to ensure its correct and safe use. By following all the general safety instructions
contained in this manual, it will ensure both product and operator safety, together with longer life of the product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper Tools
policy of continuous improvement determines the right to make modifications without prior warning.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Draper StormForce SG80SF
Summary of Contents for Draper StormForce SG80SF
-
Page 1: Airless Spray Gun
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product. -
Page 2: Title Page
Commercial copying, redistribution, hiring or lending is prohibited. No part of this publication may be stored in a retrieval system or transmitted in any other form or means without written permission from Draper Tools Limited. In all cases this copyright notice must remain intact. -
Page 3: Table Of Contents
CONTENTS 2.1 CONTENTS Page content Page TITLE PAGE INTRODUCTION ....................2 REVISION HISTORY....................2 UNDERSTANDING THIS MANUAL ...............2 COPYRIGHT NOTICE....................2 CONTENTS CONTENTS ......................3 GUARANTEE GUARANTEE ......................4 INTRODUCTION SCOPE ........................5 SPECIFICATION ......................5 HANDLING & STORAGE ..................5 HEALTH & SAFETY INFORMATION GENERAL SAFETY INSTRUCTIONS FOR POWER TOOL USE .........6 - 8 ADDITIONAL SAFETY INSTRUCTIONS FOR SPRAY GUNS ........8 CONNECTION TO THE POWER SUPPLY..............9 TECHNICAL DESCRIPTION... -
Page 4: Guarantee
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised. Your Draper guarantee is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the guarantee period. -
Page 5: Introduction
INTRODUCTION 4.1 SCOPE This spray gun is intended mainly for use outdoors. Ideal for spraying rough sawn surfaces such as fences, sheds and benches. It is intended for domestic and light commercial use only. Any other application is considered misuse. 4.2 SPECIFICATION Stock no .......................... -
Page 6: Health & Safety Information
HEALTH & SAFETY INFORMATION 5.1 GENERAL SAFETY INSTRUCTIONS FOR POWER TOOL USE When using any type of power tool there are steps that should be taken to make sure that you, as the user, remain safe. Common sense and a respect for the tool will help reduce the risk of injury. Read the instruction manual fully. - Page 7 HEALTH & SAFETY INFORMATION Wear personal protective equipment (PPE). Dust, noise, vibration and swarf can all be dangerous if not suitably protected against. If the work involving the power tool creates dust or fumes; wear a dust mask. Vibration to the hand, caused by operating some tools for longer periods must be protected against.
-
Page 8: Additional Safety Instructions For Spray Guns
HEALTH & SAFETY INFORMATION Have this tool repaired by a qualified person. This tool is designed to confirm to the relevant international and local standards and as such should be maintained and repaired by someone qualified; using only original parts supplied by the manufacturer: This will ensure the tool remains safe to use. -
Page 9: Connection To The Power Supply
HEALTH & SAFETY INFORMATION CONNECTION TO THE POWER SUPPLY Make sure the power supply information on the machine’s rating plate are compatible with the power supply you intend to connect it to. This product comes supplied with a UK standard 3 pin plug fitted. It is designed for connection to a domestic power supply rated at 230V AC. -
Page 10: Technical Description
TECHNICAL DESCRIPTION 6.1 IDENTIFICATION 700ml container Handgrip 0.8mm Nozzle (Black) Plug & cable Pressure adjustment Trigger... -
Page 11: Unpacking & Checking
Lay the contents out and check them against the parts shown below. If any part is damaged or missing; please contact the Draper Help Line (the telephone number appears on the Title page) and do not attempt to use the power tool. -
Page 12: Operating And Use
OPERATION AND USE NOTE: Remove the plug from the socket FIG.1 before carrying out adjustment, servicing or maintenance. VISCOSITY MEASUREMENT - FIG. 1 Thoroughly mix the material appropriate for the intended job. Immerse the measurement fully. Raise the cup and measure the time taken for it to empty in seconds. -
Page 13: Spray Regulation
OPERATION AND USE SPRAY REGULATION - FIG. 3 FIG.3 Rotate the pressure adjustment knob clockwise to reduce the output or anti-clockwise to increase the output. Set up the required volume by testing the spray on a small area of the workpiece or a scrap piece of timber. -
Page 14: Spraying Techniques
OPERATION AND USE SPRAYING TECHNIQUES Due to the nature of this type of spray gun, overspray is reduced, however some masking may still be required. Clean the area thoroughly. Remove any dust. Keep the gun upright at all times as tilting will introduce air gaps into the material being sprayed. -
Page 15: Troubleshooting
TROUBLESHOOTING TROUBLESHOOTING WARNING: For your own safety, turn the switch off and remove the plug from the power supply socket. PROBLEM POSSIBLE CAUSE REQUIRED ACTION • Motor hums but • Valve worn • Replace valve does not spray or • Piston stuck •... -
Page 16: Maintenance
10. MAINTENANCE 10.1 MAINTENANCE AND PARTS REPLACEMENT NOTE: Remove the plug from the socket before carrying out adjustment, servicing or maintenance. DO NOT clean the parts holding the machine under flowing water or by submerging the machine in water or thinners. It is essential that the spray gun is cleaned thoroughly after every use. -
Page 17: Explanation Of Symbols
11. EXPLANATION OF SYMBOLS 11.1 EXPLANATION OF SYMBOLS Warning! Wear dust mask. Warning! Read the instruction manual Warning! Warning! Wear suitable eye/face Wear ear defenders. protection. WEEE Do not dispose of Waste Electrical & Electronic Equipment in with domestic rubbish Class II construction (Double insulated). -
Page 18: Disposal
12. DISPOSAL 12.1 DISPOSAL • At the end of the machine’s working life, or when it can no longer be repaired, ensure that it is disposed of according to national regulations. • Contact your local authority for details of collection schemes in your area. In all circumstances: •... - Page 19 NOTES...
- Page 20 - Sales Desk: (023) 8049 4333 - General Enquiries: (023) 8026 6355 - Service/Warranty Repair Agent For aftersales servicing or warranty repairs, please contact the Draper Tools Help Line for details of an agent in your local area. YOUR DRAPER STOCKIST RDCH0816...
Need help?
Do you have a question about the StormForce SG80SF and is the answer not in the manual?
Questions and answers