Handling the remote control CONTENTS Location of the remote control Use the remote control within a distance of 26 feet (8 meters) from the Handling the remote control.............. 2 appliance, pointing it towards the receiver. Reception is confirmed by a beep. Remote control specifications ............
Page 3
Models PORT8000, PORT10000, PORT12000, PORT14000 SET TEMPERATURE(°F) Rated Voltage 3.0V (Two dry batteries R03/LR03X2 AUTO or AAA) COOL HIGH Lowest Voltage of HEAT 62°F(17°C). 2.0V CPU Emitting Signal TEMP Signal Receiving 26 feet (8 m) Range MODE ON/OFF FAN SPEED Environment -41°F–140°F (-5°C–60°C)
Indicators on LCD Function buttons (continued) MODE display Displays the current selected mode. Including AUTO, SET TEMPERATURE(°F) COOL, DRY, HEAT* and FAN. AUTO *Not applicable to cooling only units. COOL HIGH HEAT Transmission Indicator TEMP This transmission indicator will light when the remote control transmits signals to the indoor unit.
Ensure the unit is plugged in and power is is not applicable to units with manually adjusted SET TEMPERATURE(°F) SET TEMPERATURE(°F) available. AUTO AUTO louvers, including the PORT8000, PORT10000, 1. Pres s the MODE button to select COOL HIGH HIGH COOL COOL PORT12000 and PORT14000 models.
Timer operation IMPORTANT Press the TIMER ON button to set the auto-on The effective operation time set by the remote control for the timer time on the unit. Press the TIMER OFF button to function is limited to the following settings: 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, set the auto-off time on the unit.
TIMER ON TIMER OFF TIMER OFF (Off Start Stop operation) (Auto-off Operation) This feature is useful when you want to start The TIMER OFF feature is useful when you want TIMER ON OFF TIMER OFF the air conditioner before you wake up and the unit to turn off automatically after you go to bed.
Page 8
NOTE: Button design is based on typical model and might be slightly different from the actual one you purchased. If the unit does not have one of the features in this remote control user manual, the button for that feature will not do anything when pressed on the remote control.