NP40/50/60 Installation Guide
Ceiling Mounted and Desktop
Contents
Product Description
Type:
.55 DDR DMD™ projector
Resolution:
1024 x 768
Brightness:
NP40: 2200 ANSI Lumens
NP50: 2600 ANSI Lumens
NP60: 3000 ANSI Lumens
Lens Specifications
Throw Ratio:
1.8 - 2.2 (for 100" diagonal)
Offset Angle:
9.8° - 11.7° (for 100" diagonal)
Screen Sizes:
30" - 300" diagonal (4:3)
Notes
For screen sizes not indicated on the projection tables, use the formulas below.
If the figures on the tables do not match the results of formulas, use the figures in the table.
•
All calculations are based on a 4:3 aspect ratio.
•
Distances are in inches, for millimeters multiply by 25.4.
•
Distances may vary ±5%.
Formulas
The Projection Formulas use the image width for calculation. For proper projection placement, determine the image width
for the desired screen size. Use the Screen Formulas below to calculate all screen dimensions. Plug in the width for "W" in
the Projection Formulas.
Refer to the diagrams and charts for popular screen sizes on page 2:
Definitions:
C = Throw distance
D = Vertical distance between lens center and screen top
(screen bottom for desktop application)
Projection Formulas:
B = 0.481W
C (wide) = 1.830W -0. 600
C (tele) = 2.203W - 0.800
α (wide) = tan¯¹ (B/C(wide))
α (tele) = tan¯¹ (B/C(tele))
______________________________________________________________________________________________________________________
www.necdisplay.com
NEC Display Solutions of America, Inc.
Pg 1
Pg 2
Pg 3
Pg 4
Pg 5
Pg 6
Dimensions:
9.7"(W) x 3.9"(H) x 7.1"(D)
Weight:
3.5 lbs
Focal Length:
20.4 -24.5mm
F/#:
2.2 - 2.34
Manual Zoom/Power Focus (w/autofocus)
4:3 Screen Formulas:
Rev 1.2
NP40/50/60
Page 1 of 6