Asus X99-DELUXE II SERIES Bios Manual page 61

HAMP Fan Min. Duty Cycle(%)
Use the <+> or <-> keys to adjust the minimum HAMP Fan duty cycle. The
values range from 60% to 100%. When the temperature source is under
the limit, the HAMP Fan will operate at the minimum duty cycle.
ASUS FAN EXTENSION CARD is required to configure these items
Extension Fan 1-3 Q-Fan Control
[Disabled]
[DC mode]
[PWM mode]
Extension Fan 1-3 Q-Fan Source
The assignment fan will be controlled according to the selected temperature source.
Configuration options: [CPU] [MotherBoard] [PCIEX16_1 Slot] [PCIEX16_3 Slot]
[VRM] [PCH] [T_SENSOR1] [EXT_Sensor1] [EXT_Sensor2] [EXT_Sensor3] [Multiple
Sources]
• For EXT_Sensor1-3, connect a Thermistor cable to the EXT_TS1-3 header then place
the other end to the component to get the temperature.
• For Multiple Sources, select up to three temperature sources and the fan will
automatically change based on the highest temperature.
Extension Fan 1-3 Fan Speed Low Limit
This item allows you to disable or set the extension fan warning speed.
Configuration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]
Extension Fan 1-3 Profile
This item allows you to set the appropriate performance level of the extension fan.
[Standard]
[Silent]
[Turbo]
[Manual]
The following items appear only when you set the Extension Fan Profile to [Manual].
Extension Fan 1-3 Upper Temperature
Use the <+> or <-> keys to adjust the upper limit of the extension fan
temperature. The values range from 45°C to 75°C. The extension fan will
operate at the maximum duty cycle when the temperature source is higher
than the limit.
Extension Fan 1-3 Max. Duty Cycle (%)
Use the <+> or <-> keys to adjust the maximum extension fan duty cycle.
The values range from 60% to 100%. When the temperature source
reaches the upper limit, the extension fan will operate at the maximum duty
cycle.
ASUS X99-DELUXE II Series BIOS Manual
Disable the Extension Fan Q-Fan control feature.
Enable the Extension Fan Q-Fan control in DC mode for 3-pin
extension fan.
Enable the Extension Fan Q-Fan control in PWM mode for 4-pin
extension fan.
Set to make the extension fan adjust automatically depending on the
CPU temperature.
Set to minimize the fan speed for quiet extension fan operation.
Set to achieve maximum extension fan speed.
Set to assign the detailed fan speed control parameters.
61