Low Battery Icon
Battery icon by time-Change batteries in the clock.
•
Battery icon by outdoor temperature-Change batteries in the sensor.
•
Mount Temperature Sensor
• Mount the outdoor sensor on a north-facing wall or in any
well-shaded area. Under an eave or deck rail is preferred.
• The maximum wireless transmission range to the forecast station is
over 300 feet (91 meters) in open air; this does not include barriers
such as walls or floors.
• Be sure the outdoor sensor is mounted vertically.
Position Clock
The clock has pullout stand to sit on a desk or table, or an opening on
the back to mount on the wall.
For best Atomic time reception orientate the clock with the front or
•
the back facing Ft. Collins, Colorado.
Choose a location 6 feet or more from electronics such as cordless
•
phones, gaming systems, televisions, microwaves, routers etc.
Place within range of the outdoor sensor (300 feet open air).
•
Restart
When the outdoor readings show dashes:
• Bring the sensor in the house five feet from the station.
• Remove batteries from the sensor, and the batteries from the clock.
• Press any button 20 times.
• After 15 minutes insert batteries into the sensor, and into the clock.
• Wait 15 minutes to establish a strong connection. Place sensor outside
in shaded location.
513-1417
www.lacrossetechnology.com/support
Page 8