Headphone Socket, Connecting Equipment To The Side Of The Television; Connections And Controls; Using The Remote Control - Toshiba 20W300PG Manual

Table of Contents

Advertisement

A wide variety of external equipment can be connected via the sockets located on the side of the television.
Whilst all the necessary adjustments and controls for the television are made using the remote control, the buttons
right side of the
TV may be used for some functions.
AUDIO LINEOUT
HEADPHONE
AV-4
S-VIDEO
Switching on
If the power-on light is unlit, connect the plug of the
mains socket-outlet and the red LED will light. Press the
STAND-BY button of the television to switch the televi-
sion on. Then the LED will turn GREEN.
To put the television into Standby, press "
remote control or on the TV. The LED will turn red.
To view the television press
number buttons. The picture may take a few seconds to
appear.

Using the remote control

Press the MENU button on the remote control to see the
menus.
In TV mode the menu appears as a group of icons each
for a menu option. Press the Left or Right button to
select a topic.
To use the options press the Up and Down buttons on
the remote control to move up and down through them
and OK, Left or Right buttons to select the required
choice. Follow the on screen instructions. The functions
of each menu are described in detail throughout the
manual.
A01-ENG-(20-23W300PG)-XX790W-MB22-(1705-CT865)-(PCPIP)-10048610&11-50106343.p65

Connections and controls

" on the
again or any of the
English
8
LED
Green=Timer/
Active Standby
Using the controls and connections
Using the control buttons
on the right side of
• To alter the volume press +
• To alter the programme position press
side of the TV.
• Press MENU and +
— and
options.
• Press MENU to finish.
When connecting mono sound equipment to
AV), connect the audio output of the equipment to the L or R
socket on the television, then press
I for left mono or Dual II for right mono.
To select the Input, press
SOURCE menu as described on
automatically sense the type of signal.
Please always refer to the owner's manual of the equipment
to be connected for full details.
- 8 -
11.06.2007, 16:39
on the
MENU
OK
LED
Red=Standby,
Green=On
the TV:
— .
on the right
to control the menu
AV-4
(FRONT-
to select Dual
AV-4
until
is highlighted in
page
18. The television will

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents