Table of Contents
Advertisement
Modify the value by rotating the Jog Dial or using the [ and I-1]
6
buttons.
The default level is
controls how much the volume will be changed from its recorded value. As
the level is reduced, the volume of all the notes on the track is
correspondingly lowered. When you raise the level, the volumes are
correspondingly increased.
Select the next track you wish to modify with the Track Select/Mute
7
buttons.
Repeat the above steps.
NOTE
You can reset each parameter to its default setting by pressing the m and a
buttons simultaneously.
Clearing a Pattern
Clearing data from a user/combination pattern is a flexible operation.
You can clear individual tracks or an entire section.
Press the (PATTERN] button to put the RY20 into Pattern Mode. Select a
1
pattern by rotating the Jog Dial or using the [ and 1-11 buttons.
Select the Clear display page by pressing the
2
display indicates
"CLEAR SURE?".
The range is from
"00".
"-99"
DELETE
Other Pattern Functions
to
The level value
"99".
55
Advertisement
Table of Contents
