Switch from "INT" (internal clock, the default) to "MIDI" (external MIDI
2
controller) by rotating the Jog Dial or by using the
If you are using the RY20 with an external sequencer, synthesizer, or
other MIDI device, set this function to
be transmitting an appropriate MIDI clock signal. Note that the
indicator is lit up.
"MIDI SYNC"
IMPORTANT
When there is no external MIDI device, this function
(internal clock).
is the normal setting when the RY20 is being used by itself.
"INT"
Drum Instruments MIDI Channel
Set the transmission and reception channel for the drum instruments.
A separate channel is provided for the bass instrument.
Select the Drum Instruments display page by pressing the
1
button. The current channel flashes beside the "CH" prompt.
and
The external device must
"MIDI".
be set to
MUST
"INT"
MIDI Functions
buttons.
or
111