Table of Contents
Advertisement
MIDI Note Numbers
Select the Note Number display page by pressing the
1
button. The current note number flashes next to the "NT" prompt.
Press the drum pad you want to modify.
2
Change the MIDI note number of the current pad by rotating the Jog Dial
3
or by using the
For the drum pads from "000" to "059" (the drum voices) you can assign
an individual MIDI note number in the range of "000" to "127" or "OFF".
For the drum pads from "060" to "119" (the bass voices) you can assign a
MIDI note number in the range of "000" to "127". However, all the note
numbers will be affected by the change. (The note number range depends
on which pad you select.)
NOTE
You can use Pad Bunk Mode to select another group of drum pads. See page 84 for
instructions regarding Pad Bank Mode.
An alternative method is to press the
pad prompt (the
"PAD"
and
by using the
focus back to the note assignment.
NOTE
If you are modifying the drum voices and did not select one of the user tables with
the previous display page, you will see the error message
attempt to modify the table. The preset table contains the mapping for General
MIDI drum voices and cannot be changed. However, if you are modifying the bass
voice you can change the value of the preset table.
and
buttons.
cursor button to change the focus to the
indicator starts flashing). Select a pad with the Jog Dial or
buttons, then press the
or
cursor button to change the
when you
"PRESET"
MIDI Functions
115
Advertisement
Table of Contents
