Table of Contents
Advertisement
3
Press the
button to start the demonstration song. The green Play
LED will flash in time with the programmed tempo setting and the song
will begin playback.
NOTE
As the song plays, the Voice Level Indicator for the active drum pad lights up on the
LCD. The display behaviour is similar to that of a VU meter.
Adjust the volume of the playback by rotating the VOLUME control.
NOTE
You cannot adjust the tempo of the demonstration song. You also cannot copy,
clear, or edit the demonstration song.
4
Press the
button to stop the demonstration song. The green Play
LED stops flashing.
NOTE
The demonstration song sets the Repeat function. For further details see page 75.
The demonstration song repeats until you stop the RY20 by pressing the
button.
5
Press the
button again to start the song from the point at which it
was stopped.
Playing the Demo Song
13
Advertisement
Table of Contents
