Advertisement
ASSEMBLY
SET UP
Your unit was carefully inspected and put in a carton for protection
from damage.
The unit is assembled except for the items shown on this page.
These items are in the carton with a bag of fasteners and loose
parts needed for assembly. Find and remove these items, The
fasteners and roose parts are shown on the next page.
HOW
TO REMOVE
FROM THE CARTON
To remove the riding mower from the carton, follow the instruc-
tions below.
I.
Open the top of the carton,
2.
The items shown at the right are in a small box. Remove and
check each item. Remove the small box.
3.
Cut each corner of the carton from the top to the bottom with
a knife.
4.
Move the shift lever to the NEUTRAL position.
5.
Make sure the parking brake is disengaged,
6.
Move the lift lever to the HIGH position,
7.
Carefully push the riding mower backwards off the wood
frame,
TOOLS YOU NEED TO ASSEMBLE THE UNIT
I.
Adjustable wrench
2.
Open end wrench 1/2" - 9/16"
3.
Open end wrench 7/16"-
1/2"
4,
Blade type screwdriver
5,
Phillips screwdriver
6.
Low Tire pressure gauge
7.
Knife
D-4656-2
12
11
I. Seat
" 5. Parts Bag
9. Battery Acid
2. Bezel
6. Owner's Manual
10. Bellows
3, Steering VVhee|
7. Battery
11. Upper Console
4. Steering Post
8, Battery Tray
12. Cover
F-88516
5
Advertisement
