Advertisement
REPAIR AND ADJUSTMENT
How To Replace The Bearings
In The Carriage Arms
NOTE: The Bearings are pressed into the carriage arms.
_.
Remove the carriage arms,
2.
Put the carriage arm on a vise or between two blocks of
wood, Allow enough clearance around the surface of the
bearing so that the bearing can be removed,
WARNING: For your protection, use safety eye
glasses.
3.
Puta punch against the top side of the bearing. Usea hammer
and hit the punch until the bearing releases from the
carriage arm.
CAUTION: Do not use a hammer to put the new bearing
into place. You will damage the bearing.
,
Set the new bearing in the ca rriagearm. Put the carriage arm
and bearing, with a piece of wood against the bearing, into a
vise. Tighten
the vise to press the bearing into the
cardage arm.
Bearing
/
Carriage Arm
28
F-88516
Advertisement
