Timer Recording With The Vcr Plus+ Programming System - Philips Color TV with built-in VCR CCA134AT Owner's Manual

Timer Recording With the VCR Plus+ Programming System (cont'd) 41
4
Press the Number 1 button to record in SP speed or the
Number 2 button to record in SLP speed. Your selection
will appear to the right of REC SPEED on the screen, although
SP=1 SLP=2 will continue to flash. For details about tape speed,
see pages 30 and 63. You cannot use the SPEED button at this
time.
ONE TIME PROGRAM
PROGRAM 1
CHANNEL 09
TIME ON 10:30 PM
TIME OFF 11:30 PM
REC SPEED SLP
SP=1 SLP=2
START DATE 07/10/99
SATURDAY
TO END PRESS EXIT
5
Press the STATUS/EXIT button. PROGRAM WAS COM-
PLETED / PLEASE TURN OFF FOR TIMER RECORDING will
appear on the screen.
If there is not a tape in the TV/VCR, PLEASE INSERT CAS-
SETTE also appears on the screen.
If there is a tape without a record tab in the TV/VCR, PLEASE
REMOVE CASSETTE also appears on the screen. If this hap-
pens, insert a different tape.
6
Turn off the TV/VCR power. The REC(ord) light will flash. If
you forget to turn off the TV/VCR, PLEASE TURN OFF FOR
TIMER RECORDING appears on the TV/VCR screen two minutes
before a timer recording starts.
Turn off the TV/VCR for the
recording. Insert a tape in the
TV/VCR. Leave the Cable
Box/DBS on (if applicable).
6
POWER
SLEEP/WAKE UP SPEED
REC/OTR
PLAY
REW
STOP
STATUS/EXIT
4
1 2 3
4 5 6
7 8 9
0
A.CH
CABLE/DBS COMBI
VCR PLUS+
/ENTER
VAR.SLOW
TRACKING F.ADV
SMART SKIP INDEX
PICTURE SEARCH SEARCH
Helpful Hints
• To exit the VCR Plus+ programming
system at any time, press the STA-
TUS/EXIT button. The display will
disappear from the screen.
• To stop a started timer recording,
press the STOP/EJECT button on
the TV/VCR.
EJECT
MEMORY
PAUSE/STILL
F.FWD
5
CH.
VOL.
MUTE
SLOW