Timer Recording With The Vcr Plus+ Programming System - Philips Color TV with built-in VCR CCA134AT Owner's Manual

40 Timer Recording With the VCR Plus+ Programming System

Follow the steps below to program a timer recording using the
PlusCode programming numbers in your TV guide. Before you
begin, make sure:
The clock has been set. If not, CLOCK MUST BE SET appears.
Channels are programmed.
There is a tape in the TV/VCR (make sure the tape's record tab
is intact and the tape is long enough to record the program).
You have completed the steps on pages 38-39.
Complete each step within 60 seconds of completing the
previous step. If you don't, you may return to step 1.
1
Press the COMBI button, then press the VCR
PLUS+/ENTER button.
VCR PLUS+ PROGRAM
PLUS CODE : – – – – – – – –
TO END PRESS EXIT
2
Press the Number buttons to enter the PlusCode pro-
gramming number of the program you wish to record (this
number is different for every program). Finally, press the VCR
PLUS+/ENTER button.
VCR PLUS+ PROGRAM
PLUS CODE : 95557 – – –
TO SET PRESS VCR +
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
3
Press the PLAY/ button or the STOP/
a ONCE, DAILY, OR WEEKLY recording. Then, press the
F.FWD/B button.
ONCE: The VCR will record a TV program on any day you
choose, up to 12 months away.
DAILY: The VCR will record every day from Monday to Friday
– starting at the same time and recording for the same length of
time.
WEEKLY: The VCR will record on the same day, at the same
time, and for the same length of time every week.
VCR PLUS+ PROGRAM
>ONCE
DAILY (MON - FRI)
WEEKLY
SELECT CHOOSE B
TO END PRESS EXIT
1
• You cannot set a timer recording if
button to select
• If CODE ERROR flashes after you
• CLASH may flash on the screen after
POWER EJECT
SLEEP/WAKE UP SPEED MEMORY
REC/OTR PAUSE/STILL
PLAY
REW F.FWD
STOP
STATUS/EXIT
1 2 3
CH.
4 5 6
7 8 9
0
A.CH
VOL.
CABLE/DBS COMBI
VCR PLUS+
VAR.SLOW /ENTER
MUTE
TRACKING F.ADV SLOW
SMART SKIP INDEX
PICTURE SEARCH SEARCH
Helpful Hints
DEFEAT RECORDING is set to ON.
Details are on page 33.
enter the PlusCode programming
number and press the VCR
PLUS+/ENTER button, the number
you entered was incorrect (for exam-
ple, too short). If this happens, enter
the correct number.
you complete step 2. This means
that the timer recording you just pro-
grammed and another timer record-
ing overlap, and thus the current
timer recording will not be carried
out.
3
2