Philips Color TV with built-in VCR CCA134AT Owner's Manual page 39

Setting Up the VCR Plus+ Programming System (cont'd) 39
2
Now, compare the channel numbers you have written in the VCR
PLUS+ CH. and CABLE/TV CH. columns. You'll notice that some
stations have VCR Plus+ and Cable/TV channel numbers that are
the same, and other stations have channel numbers that do not
match. Where the channel numbers DO NOT match, you must
tell the TV/VCR the VCR Plus+ and Cable/TV channel numbers
according to the following steps.
Make each entry within 60 seconds of the previous entry.
3
Press the COMBI button, then press the MENU button.
4
Press the PLAY/ button or the STOP/
VCR SETUP, then press the F.FWD/B button.
5
Press the PLAY/ button or the STOP/
VCR PLUS+ REF. MAP, then press the F.FWD/B button.
VCR PLUS+ CROSS REF. MAP
VCR PLUS+ CABLE/TV
124 – – –
125 – – –
01 – – – – – – –
B
02 – – –
03 – – –
TO SELECT CH PRESS
THEN ENTER CH NO.
TO END PRESS EXIT
6
Look at the lists you filled in on page 38. For stations whose
VCR Plus+ and Cable/TV channels do not match, press
the PLAY/ button or the STOP/
arrow is beside the VCR Plus+ channel you need. Then,
press the Number buttons to enter the corresponding
Cable/TV channel from your list. (Enter a "0" before single-
digit channels for the quickest results.) Continue this process until
you have entered all the stations on your list.
Note: If you are using a Cable Box/DBS, the Cable/TV channel will
be 03 or 04 (the Cable Box/DBS output channel) for every VCR
Plus+ channel. You must set the Cable Box/DBS to the channel
you want to record; leave the Cable Box/DBS on for the timer
recording.
VCR PLUS+ CROSS REF. MAP
VCR PLUS+ CABLE/TV
124 – – –
125 – – –
01 – – – – 23
B
02 – – –
03 – – –
TO SELECT CH PRESS
TO DELETE PRESS CLEAR
TO END PRESS EXIT
7
Press the STATUS/EXIT button.
button to select
button to select
button until the
2 Examine the lists on
page 38.
4-6
POWER
SLEEP/WAKE UP SPEED
REC/OTR
PLAY
REW
STOP
3
STATUS/EXIT
1 2 3
4 5 6
7 8 9
0
A.CH
CABLE/DBS COMBI
VCR PLUS+
/ENTER
VAR.SLOW
TRACKING F.ADV
SMART SKIP INDEX
PICTURE SEARCH SEARCH
Helpful Hints
• To correct a Cable/TV channel num-
ber, repeat the steps on this page.
• To clear a Cable/TV channel num-
ber, repeat steps 3-5 on this page.
Then, press the CH(annel) m/n
button to select it. Press the CLEAR
button, then press the
STATUS/EXIT button.
• To select line input for the Cable/TV
channel, press 0,0. A/V IN will
appear on the screen.
EJECT
MEMORY
PAUSE/STILL
F.FWD
7
CH.
6
VOL.
MUTE
SLOW