Light Bulb; Normal Noises - Whirlpool No Frost 390/ Manual

REFRIGERATOR LIGHT BULB
Electrical Shock Hazard
Disconnect power before
servicing.
Replace all components before
turning on the product.
Failure to do so can result in
death or electrical shock.
In case the light bulb fails to work, replace it
according to the following steps:
•
Unplug the product.

NORMAL NOISES

Some noises are considered normal to the operation of the refrigerator.
Find below a table with such noises.
Noises
of the ventilation
system
Gas expansion
noise (hissing,
similar to
leakage)
Door closing
noise
Popping
Noise characteristic of the fan. It shows that the no frost
system is working properly.
That system assures uniform temperature in the product and
makes defrosting unnecessary.
This noise is characteristic of gas expansion in the
refrigeration system. It is similar to the noise made when you
blow a balloon.
The rubber may make a hissing noise when closing the door.
This noise is characteristic of the product. It may be caused
due to a difference in temperature and in materials used in
the product which settle and make the noise. It can also be
11
•
Remove the light bulb
protector, releasing
the lock; press it
according to the
figure.
•
Unscrew the old bulb and replace it by the
new one, of same characteristics 15 Watts
at most. You will find it at an authorized
service shop.
Important:
•
Light bulbs with power higher
than 15 Watts may damage your
refrigerator.
•
Replace the protector.
•
Plug the product in.
•
The substitution of the
light bulb is not covered by the warranty.
This service will be charged.