Panasonic KX-TD816 User Manual page 152

3.2 System Control
To change the room status at a telephone in a guest room (contd.)
T7433
SHIFT
Press SHIFT until
"FEAT" is displayed.
C.Tone
On-hook.
T7436 / T7235
Features
Press "Features."
* To assign all extensions, press the " " key.
•
• Even if the room status is changed at a telephone in a guest room, DSS button indication
will not be changed automatically. It is renewed when the operator enters the checking
mode again.
• The DSS button light shows the current status as follows:
Off: Ready
Flashing red: Not ready
There are other useful Hotel Features as follows:
• To inform the guest that a message has been left, the MESSAGE button light turns on or a
single line telephone in a guest room rings. If a Voice Processing System is connected, the
guest can hear messages stored in a mailbox. (Message Waiting)
• A guest can access the extension simply by pressing one digit number (e.g. room service).
(Quick Dialling)
• An operator or manager can prohibit an intercom call from a guest room to prevent a prank
call. (Remote Station Lock Control)
152
FEAT
Press "FEAT." Rotate Jog Dial until
"Room Ready" is
at the arrow.
OR
PREV
Rotate Jog Dial or
press "PREV" until the
following is displayed.
R o o m R e a d y
S T . L o c k a b c a b c
M E N U
Press "SEL."
Room Status Ready
C.Tone
Press "Room Status
Ready."
S E L
On-hook.
Operator / Manager Operation