Table of Contents
Advertisement
Operational guide
1. Conduct unit selection or group selection to select the units to be controlled.
2. Operation mode
Press MODE key to select the operation mode. Each pressing will change
the working mode in the following sequence:
AUTO
Select the working mode you desire.
3. Fan speed shift
Press FAN SPEED key to select fan speed. Each pressing will change the fan
speed in the following sequence.
Select the desired fan speed.
4.Temperature setting
Press TEMP TIME key.
Each pressing will increase the temperature by 1
Each pressing will decrease the temperature by 1 .
The temperature could be set at your desire between 16
be displayed by the LCD.
Note: These keys will also be used in clock setting and timer setting. See the related
description for details.
5.Setting confirmation
In CONFIRM mode, pressing CONFIRM key to send control orders to air
conditioners, after which the central controller will change into cyclic monitoring
status.
Note: Within 10s if no parameter (mode, fan speed, temperature) setting keys haven t
be pressed or the CONFIRM key hasn t be pressed to send instruction to the air
conditioner, the time-out control will automatically cancel the just made settings, and
the central controller will restore cyclic monitoring status.
Total on/Total off
SET
UNI T
TEM P
O N
M O D E
FAN SPEED
SELEC T
O FF
TEM P.
TI M E
LO CK
COOL
DRY
AUTO
16
AUTO, COOL, DRY, HEAT,
FAN SPEED, TEMP, CLOCK
R E M O TE
R O O M
TEM P
C E N TR A L
TI M E TI M ER
R E M O TE
4
C O N FI R M
5
HEAT
.
and 30 , which will
Advertisement
Table of Contents
