Pioneer DEH-P90HDD Service Manual page 112

DEH-P90HDD,P900HDD
The numeral enclosed by a circle in the drawing indi-
cates the order of removal.
- How to hold the mechanism unit
1. Hold the top frame and main frame.
2. Do not hold the front of the top frame tightly
because its strength is low.
- How to remove the top frame and main frame
1. Remove the screws (4) and screws (2) of the top
Top Frame
frame in the clamped state and remove the top frame.
2. After having removed the screws of the dampers (2)
on the right and the dampers, remove the main frame.
3. Remount the product connector with the frame
removed and eject a disk.
Main Frame
Damper
Disk
Damper
- How to remove the clamper arm assy and
Clamper Arm
guide arm assy
Assy
1. Remove a total of three right, left and rear screws
Guide Arm
and remove the clamper assy.
Assy
2. Remove the left spring and remove the torsion
spring hook of the right fulcrum unit.
3. Remove the E ring of the left fulcrum and remove
the guide arm assy.
112