Pioneer DEH-P90HDD Service Manual page 108

DEH-P90HDD,P900HDD
- Error numbers with HDD
Error's name General explanation and cause
Not Available HDD An HDD which cannot be used with this product is connected.
Search Time Out The destination sector in the HDD could not be reached within the
given time.
HDD Full Additional recording of songs, updating CDDB (addition of differential
data), etc. cannot be done because there is no or not enough free
space left in the HDD.
Violation of copyright • Digital recording (copying) to the HDD cannot be done because the source
rules1 contents are made with digital recording (copying) (violation of SCMS)
• Digital recording (copying) to the HDD cannot be done because the source
contents are "No More Copy" contents in SDMI Usage Rules.
(violation of SDMI rules)
Data Write Error Data could not be recorded to the HDD after given times of "Retry"
operation.
Violation of copyright Digital recording (copying) to the HDD cannot be done unless you update this
rules2 unit to a unit compatible with SDMI Phase 2 because the source contents "has
a Trigger bit urging to shift from the screen of SDMI Phase 1 to the screen
of SDMI Phase 2" (violation of SDMI2)
PlayList Full 4
The newly recorded songs for an artist cannot be registered in any of
the "Artist Playlist files" for the artist unless you delete one or more
"Artist Playlist files" for the artist or songs in them because the maximum
number of "Artist Playlist files" for an artist are made, and the maximum
number of songs which Playlists can handle are registered in every
Playlist file for the artist.
PlayList Full 5
No more recordings can be done for today unless you delete one or more
"Playlist files for each recording date" for today or songs in them because the
maximum number (16) of "Playlist files for each recording date" for one day are
made, and the maximum number of songs which Playlists can handle are
registered in every "Playlist file for each recording date" for today.
System Disorder Disorder with the surrounding circuits (power supply, etc.) are detected
while operating.
No Digital Data No digital data are input into the core module when digital input (TX) is
selected when recording.
Communication • Reading data from/writing data to SRAM was not successful.
Error (When playing compressed audio data recorded in the HDD such as
ATRAC3.)
• Communication between the HDD and the core module microcomputer
was not successful.
Error on communication of the microcomputer/LSI in the core module
block such as ...↓
Cut of communication line, defective microcomputer/LSI, noises, etc.
108
Message on this unit
SERVER ERROR-23
(When Check-In)
ERROR-23 (Otherwise)
SERVER ERROR-30
(When Check-In)
ERROR-30 (Otherwise)
M.Server full (When recording)
ERROR-31
(When updating CDDB)
HDD capacity is full
(When updating CDDB)
Can't copy
WriteERR
(When zoning other than
FORM1, FORM2)
ERROR-55
(When updating CDDB)
SERVER WRITE ERROR
(Otherwise)
ERROR-56
ERROR-5B
ERROR-5-
SERVER ERROR-A0
(When Check-In)
ERROR-A0 (Otherwise)
NO SIGNAL, ERROR-A2
SERVER ERROR-B0
(When Check-In)
ERROR-B0 (Otherwise)