Turning Off The Power - Hitachi CP-WU5500 User Manual

Turning off the power

1. Press the STANDBY/ON button on the
projector or the remote control.
The message "Power off?" will appear
on the screen for about 5 seconds.
2. Press the STANDBY/ON button again
while the message appears.
The projector lamp will go off, and the
POWER indicator will begin blinking in
orange. Then the POWER indicator will
stop blinking and light in steady orange
when the lamp cooling is complete.
3. Attach the lens cover, after the POWER indicator turns to steady orange.
Do not turn the projector on for about 10 minutes or more after turning it off.
Also, do not turn the projector off shortly after turning it on. Such operations might
cause the lamp to malfunction or shorten the lifetime of some parts including the
lamp.
WARNING
during use or just after use, since it is too hot.
be close to the projector and easily accessible.
NOTE
powered off.
Manual - Operating Guide.
STANDBY/ON button
POWER indicator
INPUT
ASPECT
MAGNIFY
ON
OFF
PAGE
UP
DOWN
ESC
OSD MSG
User's
MYBUTTON
PbyP AUTO FREEZE
FOCUS ZOOM VOLUME
GEOMETRY PICTURE MUTE
INTERACTIVE NETWORK BLANK
MENU
ENTER
RESET
15