Connecting With Your Devices - Hitachi CP-WU5500 User Manual

Connecting with your devices

the required accessories, such as a cable in accord with the signal of the device.
Consult your dealer when the required accessory did not come with the product or
the accessory is damaged.
After making sure that the projector and the devices are turned off, perform the
back of this manual.
User's Manual - Operating Guide
to a network system, be sure to read User's Manual - Network Guide too.
WARNING
manufacturer. It may be regulated under some standard.
accessories. Route a cable so that it is neither stepped on nor pinched out.
disconnect the projector power cord for 10 minutes before touching the adapter.
terminal cover (
CAUTION
the core to the projector. That may be required by EMI regulations.
consent of the administrator of the network.
Do not connect the LAN port to any network that might have the excessive
voltage.
adapter, turn off the power of the projector and disconnect the power cord.
NOTE
operation, unless that is directed in the manual of the device.
Operating Guide.
8
9,10).
gures F-1 to F-8 at the
User's Manual -