Search Methods; Searching For Network Projectors Automatically - Epson PowerLite Home Cinema 3100 User Manual

Search Methods

You can use one of the following methods to search for the projector you want to connect to. Choose the
best method depending on your environment.

• Searching for Network Projectors Automatically

You can automatically search for available projectors on the network.
Search results differ depending on the connection mode you use.
• Quick Connection Mode: Displays the SSID for available projectors.
• Advanced Connection Mode: Displays available projectors on the network. Searches are
performed only on the same subnet. Projectors on different subnets are not displayed in the search
results.
• Searching for Network Projectors by Specifying an IP Address or Projector Name
If the projector you want to connect to is not found automatically, you can search for the target
projector by specifying the IP address or a projector name. By specifying the IP address, you can also
search for the projector at remote locations on a different subnet.
• Searching for Network Projectors Using a Profile
You can save network projector information as a profile, and then specify the profile to search for the
same projector instead of providing projector details each time you search. By creating a group of
profiles for each place where a projector is setup and managing them with folders, the target projector
can be found quickly.
Parent topic:
Searching for Network Projectors Automatically
You can automatically search for available projectors on the network, and then project images by simply
selecting the projector.
Selecting the Projector Search Method
37