Recommended Wireless Environment For Multi Pc Projection; Setting Up A Projector To Connect In Quick Connection Mode - Epson PowerLite Home Cinema 3100 User Manual

Recommended Wireless Environment for Multi PC Projection

When you connect multiple devices to a projector using the Quick connection mode, we recommend
limiting the number of devices to six or less to maintain the projection performance. The number of
devices that can connect to a projector at the same time differs depending on the wireless
communication environment.
When you connect a projector to a wireless LAN and connect multiple devices wirelessly using the
Advanced connection mode, note the following recommendations.
• Set up multiple access points so that one of the access points can connect up to 10 or 20 devices. See
the access point manual for more information on the maximum number of devices that can be
connected.
• When you use multiple access points, assign a different channel to each access point, and use
different access points for the projector connection and the computer connection.
• Use a wireless LAN controller, if possible, to enhance the connection stability.
• Use an access point that supports 802.11n.
Contact your network administrator for help in setting up the wireless environment.
Note: If your projector supports a wired LAN connection, we recommend using a wired LAN connection
when you connect multiple devices to the projector.
Parent topic:

Setting Up a Projector to Connect in Quick Connection Mode

To connect a computer directly to the projector using wireless communication, you need to select
network settings on the computer and the projector.
1. Select the necessary settings to connect your computer to a wireless LAN. See the documentation
supplied with your computer for more details.
2. Install the wireless LAN unit in the projector, if necessary. See your projector User's Guide for
instructions.
3. Turn on the projector.
4. Press the Menu button on the remote control or the control panel, select the Network menu, and
select Network Configuration.
5. Select Wireless LAN.
Selecting Projector Network Settings
19