Maintenance And Service - Eckman EKBP1 Instruction Manual

Maintenance and Service

1， Maintenance and Cleaning
Warning! Always push the lock-off button 3 to "OFF" position.
For safe and proper working, always keep the machine clean.
Always wear protective gloves when using, adjusting or cleaning the machine.
Regularly check for obvious defects such as loose fixings, and worn or damaged components.
2， Changing the Moving Blade
Warning! Always push the lock-off button 3 to "OFF" position.
Always wear protective gloves when using, adjusting or cleaning the machine.
Never attempt to operate the machine without the blade, spacer or screw correctly secured to prevent
damage to the machine.
STEP 1
STEP 2
STEP 1:
Use a 5 mm hex wrench 10 (provided) to loosen the blade screw 11 which secures the blades. Remove the bush
12. Remove the moving blade 2 as shown.
Be careful not to allow any foreign matter to become attached to the blade gear and do not damage it. Please ensure
the moving blade is in the open position if you intend to change it.
STEP 2:
Insert the moving blade 2 to fit the screw hole as shown.
Refit the bush 12. Ensure the bush 12 is located through fixed blade and moving blade.
Refit the blade screw 11 and tighten it by using a 5 mm hex wrench 10 (provided). Do not overtighten.
3， After Pruning/Storage
Warning! Always push the lock-off button 3 to "OFF" position.
7