Page 1
IMPORTANT:Read and understand this manual before assembling or operating this appliance. Improper use of this appliance can cause severe injury or death. Keep this manual in a safe place for future reference. Any questions please call the Eckman helpline on:0844 441 3011 or go to www.eckman.co.uk...
Explanation of Safety Symbols - Do not use in rain or wet - Warning! conditions. - Read the instruction manual - Always wear eye protection, before use muffler and helmet. Safety Instructions Know your machinel · Warning! Carefully observe the instructions in this manual to reduce the risk of personal injury or material damage. ·...
Page 4
g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust related hazards. 4) Power tools use and care a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
Page 5
Charger · Charger’s plug must match the outlet. Never modify the plug in any way. Unmodified plugs and matching outlets will reduce risk of electric shock. · Use your charger only to charge batteries of the type supplied with your tool. Other batteries could burst, causing personal injury and damage.
· Always be aware of falling debris when cutting the higher sides of a hedge. · Be aware of the cutting blade, always wear gloves to protect your hands from cut. Functional Description Intended Use The cordless garden pruner can be used for the following applications only: Limbing and pruning branches from trees.
Maintenance and Service 1, Maintenance and Cleaning Warning! Always push the lock-off button 3 to “OFF” position. For safe and proper working, always keep the machine clean. Always wear protective gloves when using, adjusting or cleaning the machine. Regularly check for obvious defects such as loose fixings, and worn or damaged components. 2,...
Always wear protective gloves when using, adjusting or cleaning the machine. Clean the exterior of the machine thoroughly using a soft brush and cloth. Do not use water, solvents or polishes. Remove all debris. Always lubricate the cutting blade with protective spray before storage. Operate the machine and make the moving blade to fully close position.
Equipment Category - (As defined in the Directive) Product Name: Pruning shears (Cordless Garden Pruner) Model: M06-6ET-7.2(ECKMAN MODEL NO.: EKBP1) Description: 7.2V The technical documentation is kept by:Ningbo East Tools Co.,Ltd.
Parts list DESCRIPTION DESCRIPTION Left chassis Sleeve Center base of the stand spring Bearing Self-locking retractors Bevel Gear 2 Rocker Switches Shaft ring spring Switch plugboard Sleeve spring Screw Screw Elastic washer washer Centre support button washer Positioning plate Fixed blade Switch Activities blade Switch...