Eckman EKBP1 Instruction Manual page 5

Charger
· Charger's plug must match the outlet. Never modify the plug in any way. Unmodified plugs and matching outlets will
reduce risk of electric shock.
· Use your charger only to charge batteries of the type supplied with your tool. Other batteries could burst, causing
personal injury and damage.
· Only 2 battery packs are allowed to be charged continuously in order to prevent overheating of charger, necessary rest
time is required to let the charger cool down before further charging.
· When charging is finished, unplug the charger from mains socket outlet and take away the battery pack from the charger,
do not leave the battery pack in the charger.
· Never carry the charger by its cord or pull it to disconnect from the socket. Keep the cord away from heat, oil and sharp
edges.
· Never attempt to charge non-rechargeable batteries.
· The cord of charger is not changeable, do not continue to use if the cord is damaged.
· Do not expose to water or rain, do not use in wet condition.
· Do not open the charger.
· Do not probe the charger.
· Intended for indoor use only
Additional safety instructions for garden pruner
Wear safety goggles when operating this tool.
Wear gloves when operating this tool.
Do not expose the tool to rain or high humidity.
· THIS TOOL CAN CAUSE SERIOUS INJURIES. Read instructions carefully for the correct handling, preparation,
maintenance, starting and stopping of the tool. Be familiar with all controls and proper use of the tool;
· Only use the tool in daylight or good artificial light.
· Never allow children to use the tool;
· Beware of overhead power lines;
· Avoid operating while people, especially children are nearby;
· Dress properly! Do not wear loose clothing or jewellery which can be caught in moving parts. Use of sturdy gloves,
non-skid footwear, and safety glasses is recommended;
· If the tool stalls, immediately switch it off. Remove the battery before attempting to remove any obstructions;
· Remove the battery before checking, maintenance or working on the tool;
· While operating the tool be always sure of a safe and secure operating position especially when using steps or a ladder;
· Do not attempt to repair the tool;
· Do not operate the tool with a damaged or excessively worn cutting device;
· Always wear ear protection, goggle and helmet during operating;
· Always ensure that all guards are fitted when using the tool. Never attempt to use an incomplete tool or a tool with
unauthorized modifications;
· Always use two hands to operate the tool;
· When transporting or storing the tool always fit the blade sheath.
· Always be aware of your surroundings and stay alert for possible hazards that you may not hear due to the noise of the
tool;
· Do not carry the tool with your hands on the switch unless the battery has been removed .
· If you have not used a hedge trimmer before, preferably seek practical instruction by an experienced user in addition to
studying this manual.
· Never touch the blades while the tool is running .
· Never attempt to force the blades to come to a standstill.
· Do not put the tool down until the blade have come to a complete standstill .
· Regularly check the blades for damage and wear . Do not use the machine when the blades are damaged.
· Take care to avoid hard objects (e.g. metal wire, railings)when trimming. Should you accidentally hit any such object
immediately switch the tool off and check for any damage.
· Should the tool start to vibrate abnormally, immediately switch it off and check for any damage.
4