Advertisement
Use the transmitter buttons as illustrated to adjust the features required. Keep re-pressing the transmitter button that
relates to the feature you want to adjust until the correct amount of chirp/beeps is heard. Move on to the next feature.
One LED Pulse
Button
(Factory Default
Gasoline Engine
Diesel Engine with
+
Wait-to-Start Light
(White/Green Wire
Must Be Connected)
10 min. Run Time
Factory Alarm Disarm
with Channel 3 On
Constant Parking
Light Output
Before Start
P
ress
+
Remote S
Fahrenheit Display
+
for Temperature
Temperature Control
+
Starting "Off"
*Safe Start (Child Safety Mode)
Factory defaults setting is to press
start, program the transmitter to start the vehicle using
Remote Start Feature Programming
One Chirp
LED Two Pulse
Setting)
Diesel Engine without
Wait-To-Start Light
Warm-up Timer
20 min. Run Time
Without this Feature
Flashing Output
Door Lock
After Shutdown
Press
-
Button
to Activate
tart*
for Temperature
Temperature Control
Starting 5° F (-15° C)
Step 4
ON
button twice to start the vehicle. To lessen the chance of an accidental remote
Step 3
Two Chirps
Diesel Engine without
Wait-To-Start Light
10 Second
Parking Light
Door Lock Before Start
Door Lock
+
Buttons
to Activate
Remote Start
Celsius Display
Temperature Control
Starting -4° F (-20° C)
Turn On the Ignition
3 long chirps & 3 flashes of the parking lights will
confirm exit of the programming mode.
Note: Waiting 15 seconds after the last command will
also cause the system to automatically exit the pro-
gramming mode.
+
buttons.
Three Chirps
LED Three Pulse
Diesel Engine without
15 Second
Warm-up Timer
30 min. Run Time
and Door Lock
After Shut Down
Press
Button
to Activate
Remote Start
Starting -22° F (-30° C)
Four Chirps
LED Four Pulse
Wait-To-Start Light
20 Second
Warm-up Timer
5 min. Run Time
Without this Feature
Temperature Control
21
Advertisement
