Download Print this page

Kenmore 790.4025 Use & Care Manual page 17

Advertisement

Self Clean (available in upper oven only)
The Self Clean key controls the self clean feature. If you are
planning to use the oven directly after a self clean cycle
remember to allow time for the oven to cool down and the oven
door to unlock. This normally takes about one hour. So a 3 hour
self clean cycle will actually take about 4 hours to complete.
It is recommend to use a 2 hour self clean cycle for light soils, a
3 hour cycle for average soils, and 4 hours for heaviest soils.
To avoid possible burns use care when opening
the oven door after the self cleaning cycle, stand to the side of
the oven when opening the door to allow hot air or steam to
escape. The oven bake and broil elements may appear to have
cool after they are been turned off. The elements may still be
hot enough to cause burns if touched before they have cooled
completely.
Do not force the oven door open during self clean or while the
door is locking. This can damage the automatic door locking
system. Use caution and avoid possible burns when opening the
door after the self cleaning cycle has completed. The oven may
still be very hot.
To start an immediate self clean cycle or to set a delay start
time of 4:30 and shut-off automatically (example is a default 3
hour self clean cycle):
1.
Be sure clock is set for correct time of day and door is
closed.
2. Press UPPER OVEN.
3. Press Self Clean. The display will show
4. Press
. CLEAN will flash and 3:00 HR will show in the
display. The oven will automatically clean for a 3 hour
period (default clean cycle). Note: if a 2 or 4 hour clean
time is desired, press the arrow key to toggle to 2 hour or a
4 hour clean time.
5. When the control accepts the self clean the DOOR
LOCKED icon will flash; CLEAN icon and the letters CLn will
remain in the display.
6. As soon as the control is set, the motor driven oven door
lock will begin to close automatically. Once the door has
been locked the DOOR LOCKED indicator light will stop
flashing and remain on. Also, the oven icon will appear in
the display.
Note: Allow 15 seconds for the oven door to lock.
Important note:
Delayed Start Self Clean:
To start delay start self clean:
1.
2. Be sure the clock shows the correct time of day.
3. Press UPPER OVEN.
4. Press Delay Start.
5. Press and hold
6. Press Self Clean. The display will show
7.
8. When the control accepts the self clean the DOOR
---
.
9. As soon as the control is set, the motor driven oven door
10. Once the starting time is reached CLn will appear in the dis-
If it becomes necessary to stop self clean when active
1. Press
2. If self clean has heated the oven to a high temperature,
3. Restart self clean if needed.
17
If self clean is active and a power failure occurs, the oven
may not have thoroughly cleaned. This would depend on
how much cleaning time had elapsed before the power
failure. If needed after power is restored, set self clean
again.
Be sure the oven is empty and all oven racks are removed.
Be sure oven door is completely closed.
to scroll to the time desired to start
the self clean cycle. Release the arrow key when the desired
start time is displayed and wait for the control to accept the
set time.
Press
. CLEAN will flash and 3:00 HR will show in the
display. The oven will automatically clean for a 3 hour
period (default clean cycle). Note: If a 2 or 4 hour clean
time is desired, press the arrow key to toggle to 2 hour or a
4 hour clean time.
LOCKED icon will flash; CLEAN icon and the letters CLn will
remain in the display.
lock will begin to close automatically. Once the door has
been locked the DOOR LOCKED indicator light will stop
flashing and remain on. Also, the oven icon will appear in
the display.
play and the self clean will start automatically.
.
allow enough time for the oven to cool and for the OVEN
LOCK indicator light to turn off. When this indicator light
turns off the oven door may be opened.
Setting Oven Controls
---
.

Hide quick links:

Advertisement

loading