D4.Change Led Tube - OPCOM GrowWall User Manual

User Manual

D4.Change LED Tube

The lamps are pre-assembled, you can replace the LED tube if necessary.
How to replace the LED tube:
3
GrowWall
Step 3.
Release the lamp holder
(refer to page 21). Move the
lamp holder against the
vertical tube. Remove the
LED Tube.
Step 4.
Insert the new LED tube.
And move lamp holder
against the white rubber ring
and lock it.
1
Step 1.
Unplug the lamp power cable.
2
Step 2.
Pull out the cable from the cable holder on the
LED arm.
White rubber ring
P30
4
Tube
Mark