Table of Contents
Advertisement
User Manual
3. To secure the bracket to the wall, first make a mark on the wall using 3M tape to
stick to the wall (Recommend) or using the bracket as a guide. Drill a hole (using a
0.25 inch (5mm) bit) on the mark and insert the anchor. Expose the adhesive strip
on the back of the bracket, align the anchor and the bracket hole insert the
screwdriver with the Phillips head.
Option I
Easy installation - with 3M tape.
(Recommend)
!
Caution
Ensure that the bracket has been firmly bolted to the wall, to avoid tip-over
accidents.
GrowWall
Option II
or
Firmly installation - drill bracket hole.
P13
Advertisement
Table of Contents
