Sharp PC-1500 Applications Manual page 4

All and more about Sharp PC-1 500 at http://www.PC-1500.info
• Kev Operation Procedure:
For your program execution , the act ual key operation procedure is shown
step by step by using the example.
• Program List:
Printouts of eighteen characters per line through the CE- 150 are listed in full
size or reduction.
How to enter the programs into the machine.
The Program List shown in this applications manual is basically supposed to
be typed in as
it is printed.
However,
such as;
there are several points you should know in prior to the typing
I)
The colon(:) right after
e ach
line number must be omitted.
2) [
e"rnA] key must be pressed at the end of each program line.
3)
The numeral one
(I )
and the Jetter
I
look alike on the
program list, so you can not be too care ful.
For more details, refer to page 26on of the inst ruction manual of the PC-1500.
*
Please make sure that you read through the instruction manual first, then
try to type in the programs listed in this applications manual.
• Also make sure that you
use
these programs after through checks through
such as the examples.
*
Sharp Ctlrporation and/or
its
subsidiaries assume no responsibilities or
obligations to any
los. ~es
or damages that could arise through the use of
this applica tions manual.
• Memory
Contents:
Memory contents during the program execution are explained.
*
Constants, such as tax ra tes, if any, may vary from country to country or
district to district.
They may also be subject to changes according to t he revisions of Jaws and re·
gulations, or other reaso1 1s. So, please be careful wE 1en you use these programs
as they are listed here.
'*
For continuous improvements and additions, these programs are subject to
change without notices.
" To help us improve
01n
programs, we would appreciate any suggestions or
comments in writing.
Do not sale this PDF !!!