Sharp PC-1500 Applications Manual page 212

A ll and more about Sharp PC-1500 at http://www.PC- 1500.info
SHARP
PROGRAM
TITLE
DOT PATTERN DEVELOPMENT
PROGRAM NO.
P5 - F- 6
( Outline ]
CE- 150
required
With this unique program, you can play a decisive role in pattern generation!
Using the
OJ , GJ , W
and
CD
keys, as well as alphanumeric
keys
0
and
W ,
you can develop dot patterns :at your discretion on the
computer display.
Any pattern generated can be recorded for printout by using the
[!]
key.
( Operating Guide]
l.
Key Operation ITl
t
GJ-
- w
The moves are in response
to each key.
2. Mode Setting
l
OJ
cancels the dot on display.
l~tU\" El
holds the dot on display.
ff
RACE>
sends the display pattern to
the
printer.
· ends the program.
3 . 0 - 100 columns are available for patterns.
4. Remark:
Normal key operation causes a beep tone to confirm the entry.
With a key pressed other than specified, two beep tones warn the key operator.
When the dot range is going to exceed the specified range, three beep tones
occur to give warning.
[Contents ] (Formula)
~.
Processing is perfonned in respones to the numeral keys and mode
setting keys.
2.
When set, the mode is indicated on the right side of the display.
3. When selected, printout mode
0
sends the
pattern on
the disph1y to
the printer, after which the mode
is
reset to pattern generation mode
m
Tltis allows you to modify or upgrade the pattern.
bit
weight
(Hexadecimal)
The pattern
is
coded in
the
hexadeci-
1
mal system. The (ed on the printer
paper
~.
- - - represents a completed dot.
4. The
m
key is pressed
to
end this program.
Do not sale this PDF !!!
- 206-
1