Sharp PC-1500 Applications Manual page 112

All and more about Sharp PC-1500 at http://www.PC-1500.info
SHARP
PROGRAM
Tl libE
[ Outline ]
WORKING HOUR
PROPORTIONAL PROCESSING
PROGRAM NO.
PS- D-11
Values of working hours can be detennined with the inputs of starting and closing
times.
Be noted that 24 hour system is employed here.
[ Operating Guide ]
(I) First clear the total by pressing the I"" I
0
keys. Then set the pro-
portional value using the
loul [D
keys. (After this, use the I0£•1
0
or
IDEF I
0
keys as needed.)
(2) Press the I
O£F
I
0
to key-in the staring time and the closing time. The value
for the working hours will be displayed.
(3) Repeat the
ioul
0
and IO£F I
0
according to proportional value and
numbe( of data.
( 4) The total value is displayed by using the I O£F.I
0
keys.
I
Example]
(1)
Keyin proportional value 500 after the ID£•1
0
(This should be the proportional value to the working hours between 9:00
and 17:00)
(2) The
loul
W
key is used to clear the total area to zero.
(3) With the work-hour data 9:30 to I 7:00, 14:00 to l 6:00 and 17:00 to 23: I 0,
input " 9 .30'' "I 7 .00", and "14.00'', "16.00" after the I D£FI
0
operation,
then "7.30 (T) •500 = 3750" and "2.00 (T) •500 = 1000" will be displayed
respectively .
When the proportional value after 17:00 is 1000, replace 500 with 1000
after the
lo••I W
operation, then key-in "17.00", "23.10" after !O£F I
0 .
As a result, "6. I O(T)• l 000 = 6166" is displayed.
(4) ' 'TOTAL = 10916" is displayed after 1 -1
CD
operation.
(Contents
I
(Formulas)
" A" With the inputs of the starting time and the closing time (Minutes should
be a decimal number), "Elapsed Time x Proportional Value = Work-hour
Value" is displayed.
There is no limit to the number of data.
Pressing the IY'@ ends processing.
"B" The total value for working hours is displayed.
"C"
The proportional value is reset.
"D" The total area is cleared to zero.
NOTE: For tJ1e elapsed time display, "9.30 (T)'' means 9 hours 30 minutes.
Do not sale this PDF !!!
- 106-
1