Chapter
HP-IB Interfacing
What You'll Learn in This Chapter
This chapter is only for 7470 owners with an HP-IB interface. HP 7470s
with Option 002 have an HP-IB interface.
In this chapter you'll learn how to operate your plotter when it is con
nected to a computer using the Hewlett-Packard Interface Bus (HP-IB),
which conforms to ANSI/IEEE 488-1978 specifications. This chapter
defines the 7470's implementation of the bus. Also included are address
ing the 7470, the listen-only mode, reaction to bus clear commands,
serial and parallel polling, addressing the 7470 as a talker or listener,
and examples of sending a n d receiving data using a variety of
computers.
This chapter assumes you have a working knowledge of the HP-IB;
however, if you wish to refresh your memory on HP-IB structure, refer
to Appendix A of this manual, entitled An HP-IB Overview.
9
HP-IB INTERFACING
9-1