Panasonic CF-17 Reference Manual page 35

Technical Information
Enabling Power Conservation
Confirm that Phoenix APM 2.0 for Windows NT
displayed in [Control Panel], this means that the program is installed.) If the program is
not installed, be sure to install it.
Use [Power Management] under [Advanced].
• When an attempt is made to shut Windows down after the setting for [Power Manage-
ment] (in [Start] - [Settings] - [Control Panel] - [APM 2.0 for NT] - [Settings]) has been
changed to [Standard] or [Off], the computer will not go OFF but will reboot even when
[Shut Down] is selected.
• When [Power Management] (in [Start] - [Settings] - [Control Panel] - [APM 2.0 for NT]
- [Settings]) is started up under [Standard], if the setting is changed to [Off], the setting
will not take effect until after Windows NT is restarted.
® is installed. (If [APM 2.0 for NT] is
35