Setting Bake - Kenmore 790.4500series Use & Care Manual

Setting Oven Controls

Setting Bake

Bake
The BAKE pad controls normal baking. If preheating is necessary, refer to the
instructions. The oven can be programmed to bake at any temperature from 170° F to 550° F (the sample shown below is
for 350°F).
INSTRUCTIONS
To set the Bake Temperature to 375°F
1. Arrange interior oven racks and place food in oven.
Bake
2. Press , «350» will appear and «BAKE» will flash in the
display (Figure 1). If a bake of 350°F is needed, press
7 5
3
3. Press
and «375°» will appear in the display.
START
4. Press . The actual temperature will be displayed (Figure 3).
A beep will sound once the oven temperature reaches 375°F and
the display will show «375°» and «BAKE» (Figure 4).
STOP
Pressing will cancel the Bake feature at any time.
To change the Bake Temperature (example: changing
from 375°F to 425°F)
1. After the oven has already been set to bake at 375°F and the
oven temperature needs to be changed to 425°F, press
(Figure 5) and «375» will appear and «BAKE» will flash in the
display.
4 2
5
2. Press
and «425°» will appear in the display.
START
3. Press .
Note: During the first rise of temperature, the convection fan will be
activated to allow the oven to reach its target temperature faster. The
Bake, Broil and Convection elements will also cycle for better heat
distribution.
(Figure 2). «BAKE» will continue to flash
(Figure 6). «BAKE» will continue to flash
PRESS
Bake
START
.
7
3
START
STOP
Bake Bake
4 2
START
20
Pre
Heat
Preheat Feature for
DISPLAY
TIMED DELAY TIMER
DOOR LOCKED CLEAN
Figure 1
5
TIMED DELAY TIMER
DOOR LOCKED CLEAN
Figure 2
TIMED DELAY TIMER
DOOR LOCKED CLEAN
Figure 3
TIMED DELAY TIMER
DOOR LOCKED CLEAN
Figure 4
5
TIMED DELAY TIMER
DOOR LOCKED CLEAN
Figure 5
TIMED DELAY TIMER
DOOR LOCKED CLEAN
Figure 6
CONV BAKE BROIL
ROAST WARM PROBE
CONV BAKE BROIL
ROAST WARM PROBE
CONV BAKE BROIL
ROAST WARM PROBE
CONV BAKE BROIL
ROAST WARM PROBE
CONV BAKE BROIL
ROAST WARM PROBE
CONV BAKE BROIL
ROAST WARM PROBE