Skoda Rapid Owner's Manual page 34

Hide thumbs Also See for Rapid:
Table of Contents

Advertisement

Counter for distance driven
Display
» fig. 14
Odometer
Counter for the distance travelled after resetting (Trip)
Select between the odometer display and the counter for the distance driven
(Trip)
Briefly press the button
» fig. 12
5
Reset the counter for distance driven (Trip)
Select the counter for distance driven (Trip).
Press and hold the
button.
5
Setting the clock
The time is set using the buttons
The choice to change the display (hours or minutes).
4
The change of the displayed value.
5
Gear recommendation
32
Usage
Fig. 14
Odometer: Total distance travel-
led/distance travelled after re-
setting
on page 26.
and
» fig. 12
on page 26.
4
5
Fig. 15
Information on the selected
gear / gear recommendation
A suitable engaged gear or, where appropriate, a recommended gear is dis-
played, with the aim of conserving the life of the engine and increasing driving
efficiency.
For vehicles with DSG automatic transmission, the recommended gear will be
shown provided the manual switching mode (Tiptronic) is selected.
Display
» fig. 15
Optimal gear engaged
Recommended gear
 - Recommends that you change up to a higher gear
 - Recommends that you change down to a lower gear
On vehicles with a manual gearbox, the recommended gear and an ar-
row symbol is displayed (e.g.   means that it is advantageous to
change up from a lower gear to 4. gear).
For vehicles with a DSG automatic gearbox mode, the currently engag-
ed gear and an arrow symbol (e.g.   means that it is advantageous to
switch from 4 to a higher gear) is displayed in manual shifting mode
(Tiptronic).
WARNING
The driver is always responsible for selecting the correct gear in different
driving situations (e.g. when overtaking).
Notice
Produced when the clutch pedal is not recommended gear indicator.
Service interval display
The service interval display shows the kilometres or days until the next service
event.
Information regarding service intervals
The service due date is automatically displayed on the display and this infor-
mation can be displayed manually at any time if necessary.
Messages before reaching the scheduled service date
Before reaching the service date, the following information is shown on the
display after switching on the ignition for about 10 seconds.
Icon  and the days remaining until the next service interval
Icon  and the kilometres remaining until the next service interval.
» page
71.

Advertisement

Table of Contents
loading

Table of Contents