Before You Start - TAD CE1 Owner's Manual

BEFORE YOU START

Thank you for buying this TAD product. Please read through
these operating instructions so you will know how to operate your
model properly. After you have finished reading the instructions,
put them away in a safe place for future reference.
 This speaker system has an impedance of 4 ohms, and
should be connected only to an amplifier designed with a
load impedance of 4 ohms (the amplifier's speaker output
connector should clearly be labeled "4 ohms").
In order to prevent damage to the speaker system resulting from
input overload, please observe the following precautions:
 Do not supply power to the speaker system in excess of the
maximum permissible input.
 Always turn off the amplifier power whenever connecting this
unit or other components to the amplifier.
 Be careful not to overload the amplifier by playing at high
sound levels, as the amplifier's harmonic distortion will be
increased and you may damage the speaker.
For U.S. model
WARNING: This product contains chemicals known
to the State of California and other governmental
entities to cause cancer and birth defects or other
reproductive harm.
For European model
If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used
electronic products in accordance with legislation that requires proper treatment, recovery and recycling.
Private households in the member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to
designated collection facilities or to a retailer (if you purchase a similar new one).
For countries not mentioned above, please contact your local authorities for the correct method of disposal.
By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential
negative effects on the environment and human health.
2
D36-P5_C1_En
Caution: installation
 Do not place the speaker on an unstable surface. It could
present a hazard if it falls, as well as potentially damaging the
equipment.
 Do not attach these speakers to the wall or ceiling. They may
fall off and cause injury.
 Switch off and unplug your AV equipment and consult the
instructions when connecting up components. Make sure you
use the correct connecting cables.
 Technical Audio Devices, Inc. is not responsible for any
accidents or damage that result from improper installation,
misuse or modification of the product, or natural disasters.
Caution: in use
 Do not allow the speaker to output distorted sound for long
periods of times. This is an indication of using excessive power
and can result in a fire hazard.
 Do not sit or stand on the speaker, or let children play on the
speaker.
 Do not put large or heavy objects on top of the speaker.
 Do not place magnetic objects such as screwdrivers or iron
parts near the tweeter or midrange. Since the speakers use
strong magnets, the objects may be attracted, causing injury
or damaging the diaphragm.
IMPORTANT NOTICE
THE MODEL NUMBER AND SERIAL NUMBER OF
THIS EQUIPMENT ARE ON THE REAR OR BOTTOM.
RECORD THESE NUMBERS IN THE SPACE BELOW
FOR FUTURE REFERENCE.
MODEL NO.
SERIAL NO.
D36-AP9-2_A1_En
K058b_A1_En