Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for EverSewn Maker 200
Summary of Contents for EverSewn Maker 200
- Page 3 IMPORTANT SAFETY INSTRUCTIONS IMPORTANT When using an electrical machine, basic safety precautions should always be followed, including the following: Please read the instruction manual carefully before using this machine. Keep the instruction manual at a suitable place with the machine and hand it over if you give the machine to a third party.
- Page 4 3. Use this machine only for its intended use as described in this manual. Use only accessories recommended by the manufacturer. 4. Children should be supervised to ensure that they do not play with the machine. 5. Never operate this machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water.
- Page 5 17. If the supply cord of the foot control is damaged, it must be replaced by the manufacturer or an appropriate service agent or a similar qualified person in order to avoid endangerment. 18. Never place anything on the foot control. 19.
- Page 6 SAVE THESE INSTRUCTIONS! Attention! - This machine is intended for household use only. If used intensively or commercially, regular cleaning and especially attentive care is required. - Signs of wear and tear owing to intensive or commercial use are not covered automatically, even if they occur within the warranty period.
- Page 24 Stitch patterns...
- Page 49 Before calling for Service, check the following items. If the problem still persists, contact the EverSewn customer support at: service@eversewn.com or call 1-844-EVERSEW (1-844-383-7739) Problem Cause Correction Upper thread breaks 1.The machine is not threaded correctly. 1.Rethread the machine. 2.The thread tension is too tight.
- Page 52 021K5CXXXX(EN)
Need help?
Do you have a question about the Maker 200 and is the answer not in the manual?
Questions and answers