Idp_Piped_State_Replaced (Id: 06100004); Idp_Piped_State_Expire (Id: 06100005); Conn_Idp_Unpiped (Id: 06100006) - D-Link DFL-260E Log Reference Manual

2.18.4. idp_piped_state_replaced (ID:
06100004)
Recommended Action
Revision

2.18.4. idp_piped_state_replaced (ID: 06100004)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters

2.18.5. idp_piped_state_expire (ID: 06100005)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters

2.18.6. conn_idp_unpiped (ID: 06100006)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Issue the "memory" CLI command and check for modules with
abnormal memory consumption. Otherwise, revise configuration in
order to free more RAM.
1
DEBUG
Replaced IDP pipe host entry <replaced_host>
An old dynamic pipe entry was removed and replaced since the
maximum number of pipe states were reached.
state_replaced
None.
1
replaced_host
old_host_ttl
DEBUG
Removed IDP dynamic pipe state for host <host> due to TTL expire
An old dynamic pipe entry was removed since its TTL expired.
Connections to and from this host are no longer piped.
state_removed
None.
1
host
NOTICE
IDP Pipe disabled. Throughput no longer limited to <limit>
A configuration change regarding the dynamic pipes' throughput
parameters have occured. The dynamic piping for this connection is
disabled.
pipe_removed
None.
1
239
Chapter 2. Log Message Reference