Adjusting The Weider Slant Board - ProForm PFVB09988.0 User Manual

ADJUSTING THE WEIDER ® SLANT BOARD
The steps below explain how the WEIDER ® slant board can be adjusted. Refer to page 8 for exercise informa-
tion.
Inspect and tighten all parts each time you use the slant board. Replace any worn parts immediately. The slant
board can be cleaned with a damp cloth and mild, non-abrasive detergent; do not use solvents.
ADJUSTING THE LEVEL OF THE BACKREST
8
To change the level of the Backrest (1), first remove
one of the Large Foam Pads (8) from the Short Pad Bar
(7). Remove the Short Pad Bar from the Swing Arm (3)
3
and the Adjustment Foot (4). Align the hole in the Swing
Arm with a different hole in the Adjustment Foot and re-
7
insert the Short Pad Bar. Then, re-attach the Large
Foam Pad.
1
4
FOLDING THE SLANT BOARD FOR STORAGE
2
The slant board can be folded for compact storage. To
fold the slant board, first remove the Locking Pin (15)
1
from the Swing Arm (3) and the Backrest Frame (2).
Fold the Swing Arm under the Backrest Frame. Re- 15
insert the Locking Pin into the Swing Arm for safekeep-
ing.
3
7