Going Outside When The Inside Handle Is In Lock Position And The Alarm System Is Armed - Easy2Access EASY-908 Manual

Unlock position for you to go outside. In 3 seconds after the POWER
button is pushed, the outside handle will get into unlock position and
will stay that for another 5 seconds. You have to lift up the outside
handle to lock the three point mortise before the timer expires. After
the timer expires, the inside handle and outside handle will get back to
lock position simultaneously. When the Red LED on the lock blinks once
and one beep is heard, the wireless alarm arming demand has been
sent out. When the red light turns on and one beep is heard on the
alarm set, the alarm system has been armed successfully.
B. Partial arming, enter the PIN code + * + * to put the inside handle
in Unlock position for you to go outside. In 3 seconds after the POWER
button is pushed, the outside handle will get into unlock position and
will stay that for another 5 seconds. You have to lift up the outside
handle to lock the three point mortise before the timer expires. After
the timer expires, the inside handle and outside handle will get back to
lock position simultaneously. When the Red LED on the lock blinks
twice and two beeps are heard, the wireless alarm arming demand has
been sent out. When the red light turns on and three beeps are heard
from the alarm set, the alarm system has been armed successfully.
Going outside when the inside handle is in lock position and the
alarm system is armed
A. Full arming and you want to lock the three point mortise after
going outside, enter the existing inside PIN code + * + the
POWER button to put the inside handle in Unlock position for you to
go outside. In 3 seconds after the POWER button is pushed, the outside
handle will get into unlock position and will stay that for another 5
seconds. You have to lift up the outside handle to lock the three point
mortise before the timer expires. After the timer expires, the inside
handle and outside handle will get back to lock position simultaneously.
When the Red LED on the lock blinks once and one beep is heard, the
wireless alarm arming demand has been sent out. When one beep is
heard and the red light turns on on the alarm set, the alarm system has
been armed successfully.
B. Partial arming, but you don't want to lock the three point
Easy2Access A/S
29
®
EASY-908 Pin Code lock
www.easy2access.net