Deleting Pin Codes; Changing The Master Code; Permanent Unlocking Mode; Automatic Locking Mode - Easy2Access EASY-908 Manual

www.easy2access.net
st
2. The 0 and 1 set PIN codes are the master PIN codes of the lock.

Deleting PIN codes

Enter *+ the set number of the PIN code which should be deleted +
one master PIN code + #.
When the Green LED blinks, the deletion operation succeeds; if the Red LED
nd
blinks, the operation fails. I.E. If we want to delete the 2 set PIN code,
enter *2 + the master PIN code + #.
Note: The master PIN codes (id no. 0 and 1) cannot be deleted
▲
they can only be changed.

Changing the Master Code

Enter * 0 + the old master code * new master code * new master code *.
The master code is now changed to a new master code.

Permanent Unlocking Mode

This mode is resembles the situation with a key. The door is open when
unlocked and locked when locked with a pin code.
For activating the permanent unlocking mode enter #1 + one master PIN
code + # (with the Green LED blinking) + 1. When the Green LED blinks
again and one long beep is heard, the lock gets into Permanent Unlocking
Mode, and user can turn down the handle to unlock without the need to
enter any PIN code.
Example: #1123#1
Be aware that the lock in permanent open mode will stay open after
unlocking this until the "Automatic locking mode" is activated again.
To lock the door in permanent open mode, press either the power button
inside or enter a code from outside.
Important Note: Permanent Unlocking Mode can be an insecure setup, as it
can easily be forgotten to lock the door. Unless you're sure it's 100%
necessary and safe, otherwise it's strongly recommended not to apply this
functionality.

Automatic Locking Mode

This mode will activate automatically locking of the door lock after 5
24
®
Easy2Access A/S EASY-908 Pin Code lock