Pre-Installations; Sizing The Spindle (To The Correct Length) - Easy2Access EASY-908 Manual

www.easy2access.net
⑦ Philips & flat head screw drivers

3. Pre-installations

Apply the rubber gasket on the door, mark the holes on the door surface and
bore the holes needed according to the instructions on the template.

4. Sizing the Spindle (to the correct length)

EASY-908 is designed to fit door thickness of 40cm to 90cm.
TRIM THE SPINDLE PER DOOR THICKNESS.
Trim the spindle accordingly, with a pair of pliers, hacksaw or metal cutters.
Notes:
1) If the door thickness falls between two notches, then mark the
appropriate spot on the tailpiece and cut the tailpiece to that length.
20
®
Easy2Access A/S EASY-908 Pin Code lock